A wide range of data sources
MXS 1.2, the evolution of MXS, is the dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation.
Freely configurable pages
You can define all the custom pages
you wish, choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons.
MXS 1.2 features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Two digital outputs
MXS 1.2 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type
(switch to ground): they can be configured in order
to be turned on/off depending on the value
of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights,
to activate/de-activate a cooling fan
or circulation pumps, etc. when
a certain event happens.
5" high contrast 1,100 lumen TFT display, 6 configurable RGB alarm LEDs, integrated 10
RGB LED shift light array, 2 Motorsport connectors + 1 Binder connector, 3 CAN
connections, CAN, RS232, K-Line connection to 1,000+ industry leading ECUs, inertial
platform, 8 analog inputs at a max of 1,000 Hz each, 4 digital speed inputs, coil RPM input,
lap signal input, 2 digital outputs, fully configurable math channels, 802.11Wi-Fi
In the Box
MXS 1.2, GPS Module with cable, USB cable, 37 pins standard harness, Race Studio 3